Propex Malaga Water Heater 5 E (13 Litres)
This high capacity water storage heater is available with an efficient gas burner, and the additional benefit of a 750 watt electric heating element. The heater provides a quick and efficient supply of hot water for showering and washing in Motorhomes, and Caravans. The heater may also be installed in boats used exclusively on inland waterways i.e. Class 1 & 2 and subject to finding a satisfactory mounting position. Being a room sealed appliance it conforms to the requirements of the Boat Safety Scheme.
Please Note: We’re unable to send Propex heaters outside the UK. If you’re based outside the UK you won’t be able to purchase a Propex heater from Just Kampers.
The Malaga water heater is equipped with the latest Propex electronics for accurate digital control of the heater operation and safety functions. The switch panel features a 3 position switch for selecting either “gas only” or “gas and 230v”. If you want to use the heater on 230v only, you simply switch off the gas tap that supplies the heater whilst leaving the switch in the “gas and 230v” position. The yellow L.E.D. on the switch panel lets you know when the gas burner is operating and also, by flashing a certain amount of times, indicates various fault conditions.
Large 13 litre capacity - for longer washing and showering Efficient gas burner - for faster warm up 750W element on Malaga E - use on its own or with the gas burner for even faster hot water Small flue terminal - neat appearance outside the caravan Safe - combustion products are completely sealed from the caravan interior
Easy to fit and service - all controls accessible at the rear of the unit Electronic control - turns on the heater at the flick of a switch and supervises burner operation Automatic resettable overheat cut out Compact dimension - more room to route pipework and ducting where necessary
Dimensions: 250 x 325 x 445mm
Weight (Empty): 9.3kg
Capacity: 13 Litre Water
Temperature Thermo Setting: 70degree
Overheat Thermo Setting: 90degree
Pressure Relief Valve Settings: 3 bar
Max Working Pressure: 2 bar
Max Working Supply Pressure: 1.3bar
Gas Heat Input: 1.15kw / 84g/h
Propane Pressure: 37mbar
Butane Pressure: 28mbar
Mixture Pressure: 30mbar
Injector: Bray 960/40
Gas Connection: 8mm O.D.
Electricity Supply: 12v DC
Mains Electricity Supply: 220/240vAC 50Hz Fused 5A.
The Malaga and Malaga E heaters have been tested and comply with the following: 90/396/EEC gas appliance directive. 89/336/EEC EMC directive. 73/23EEC low voltage directive. It is manufactured under ISO 9001:2000 plus annex 11.3 gas directives 90/396EEC.