Morris Ankor Wax (5 litres)

Part Number
J18158
In Stock
£47.50
Need Help? Call the JK Team On 01256 86 22 88
Similar To This Product

Quality Morris product. Sold in 5 litre cans. Protects your van against rust and corrosion.


Ankor Wax is a long term corrosion preventative, having low viscosity and surface tension thereby enabling it to spread rapidly, penetrating into all inaccessible areas and covering all surfaces, however irregular.


Ankor Wax is a special solvent deposited, long term corrosion preventative, that can be spread easily, penetrating into all inaccessible areas and covering all surfaces however irregular. It dries to leave a continuous firm wax protective coating that imparts excellent corrosion protection properties. Ankor Wax has de-watering properties and therefore can be used where the metal parts to be treated are wet.


All traces of water are displaced before the protective film is applied. Ankor Wax is effective in damp and humid climates and gives excellent protection against salt spray.


Features:

  • Water displacing
  • Flexible wax film
  • Long term protection
  • Un-paralleled seam penetration
  • Good coverage, 16 sq.m/litre at 25 micron
  • Universal application
  • Thixotropic Applications: Ankor Wax is recommended for medium and long term corrosion protection applications.


This product is highly recommended for protecting bright steel wire, bars, billets, sections and sheets during long term storage and transport. It many also be used as an underbody protective.


Ankor Wax is easily applied by spraying, brushing or dipping. If parts that have been treated with Ankor Wax are to be subsequently painted, the coating must be removed prior to painting. White spirit, kerosene and other hydrocarbon solvents may be used.


It is recommended that containers are stored in a cool area with bungs or caps tightly closed so as to avoid evaporation of the solvent, which would lead to excessive thickening of the product, making application increasingly difficult.


Protection Performance:

  • Indoors 3 – 5 years
  • Covered Outdoors 2 years minimum
  • Outdoors 1 – 2 years Physical


Characteristics:

Appearance Brown thixotropic fluid Density @ 15ºC 0.840 Closed Flash Point (ºC) 46

Film Thickness (µm) 30 - 100

Drying time @ 20 ºC 30 – 90 mins (dependent on application thickness)

Dewatering Yes


Figures based on average production values  

It dries to leave a continuous firm wax protective coating that imparts excellent corrosion protection properties. Ankor Wax has de-watering properties and therefore can be used where the metal parts to be treated are wet. All traces of water are displaced before the protective film is applied. Ankor Wax is effective in damp and humid climates and gives excellent protection against salt spray.