4 Inch Adjustable Narrowed Front Beam VW Type 2 1967 - 1979
Made in the UK exclusively for JK, this 4" narrowed beam features CDS seamless tube with laser cut end plates. These axles come supplied with adjusters new axle bearings and a OEM steering centre pin.
Finished in black powder coat, these axles are designed to fit Left or Right Hand drive vans with or without servo brakes, and are supplied with spacers for the upper shock mounts.
Please Note If you are running your van very low, you will need to shorten the shock stud on your lower arm for clearance. You may also need to remove some material from the lower shock eye and or remove the dust shield.
If you have a 72 on van and want to run low then you can also use the drop spindles to retain some shock travel (Due to the nature of the adjusters the axle can not be set at full height, all vehicles will be lower than standard)