
Metal Battery Clamp for VW T2 Bay from 1967 – 1979
Bracket installation
The tray underside features a captive nut, welded at an angle to match the clamp. Feed your bolt through the clamp, then thread into the captive nut below. For the clamp to do its job properly, ensure the bolt is tensioned with resistance. The clamp and plate put tension on the battery box, as well as holding it secure to the tray; this keeps the battery still while you drive.
To view the purpose-built features on a T2 Battery Tray, you can view product J20054 on our website.
High quality reproduction classic part! One hard wearing reproduction battery clamp; an essential for those undertaking classic vehicle maintenance jobs. If you still take your classic for an annual MOT, double check your clamps for wear. Often overlooked but if left unchecked, a rusted battery clamp could cost you your MOT result!
At a glance:
- Made to the same dimensions as the original VW bracket,
- Designed to specifically fit VW T2 Bays, built between 1967 and 1979,
- Metal composition enhances durability and ensures lasting performance,
- Intended for installation to the battery tray, often mounted within the offside rear corner,
- Compatible with 12 V batteries that feature a pronounced lip at the base.
Important product information
Secure your vehicle battery to prevent problems on future road trips. This clamp is designed to secure the vehicle battery to T2 Bays, still sporting a stock tray or fitted with an offside aftermarket version. The battery tray is designed with unique features which facilitate a secure fix for your power source.
Built with a pre-installed plate and captive nut, these features work with the clamp to secure the battery. Butt the battery up against the plate and the clamp will apply pressure to the opposite side. The clamp is upright when the central hole sits proudly at an angle.
A tab secures the battery to the tray, formed from the clamps longest edge. The tab rests on the pronounced lip at the base of your battery box. To secure the clamp, align the clamp hole with the tray hole beneath; use a compatible nut to secure them together.
Bracket installation
The tray underside features a captive nut, welded at an angle to match the clamp. Feed your bolt through the clamp, then thread into the captive nut below. For the clamp to do its job properly, ensure the bolt is tensioned with resistance. The clamp and plate put tension on the battery box, as well as holding it secure to the tray; this keeps the battery still while you drive.
To view the purpose-built features on a T2 Battery Tray, you can view product J20054 on our website.
Country of Manufacture | United Kingdom |
---|---|
EAN/UPC | 5056342806812 |
Width (CM - Packed) | 5.1 |
Height (CM - Packed) | 1 |
Depth (CM - Packed) | 12 |
OEM Part Number | 211-813-191/A |
-
VW T2 Bay Window (1967 - 1979) Petrol 1600cc, 1700cc, 1800cc, 2000cc LHD, RHD
-
VW T2c Brazilian Bay Window (1997 - 2013) Water-Cooled, Air-Cooled Petrol 1400cc, 1600cc LHD, RHD
-
VW Beetle (1967 - 1979) Air-Cooled Petrol 1200cc, 1300cc, 1500cc, 1600cc LHD, RHD
-
VW Karmann Ghia (1968 - 1971) Air-Cooled Petrol 1200cc, 1300cc, 1500cc, 1600cc LHD, RHD
-
VW Type 3 (1967 - 1973) Air-Cooled Petrol 1500cc, 1600cc, 1800cc LHD, RHD
-
Excellent battery clampOrdered this after the make do washer I had bent double. It arrived in 48 hours and fitted straight in place with no fiddling about needed. Decided to leave the shiny gold effect finish and just coated it in vaseline to keep rust at bay.
Posted on
-
great itemSimple and easy fit, keeps the mot guy happy
Posted on
-
Excellent item.Does exactly what it's designed for, holding a battery in it's place, excellent quality item.
Posted on
-
Exactly as I neededWasn't sure that this would do the job but it went straight in, no problem. Battery secure
Posted on
-
good quality itemGood quality item arrived on time, not yet fitted but, looks like it will fit fine.
Posted on
Seen This Product Cheaper Elsewhere?
If you have seen the same product cheaper elsewhere then please let us know.