Look out for this SAVE icon to save up to 10% off off your order. Find out more.

Metal Battery Clamp for VW T2 Bay from 1967 – 1979

£12.00
In stock

Metal Battery Clamp for VW T2 Bay from 1967 – 1979

Part Number
J11355
OEM Part Number
211-813-191/A
Rating:
96 % of 100
In stock
£12.00

Bracket installation

The tray underside features a captive nut, welded at an angle to match the clamp. Feed your bolt through the clamp, then thread into the captive nut below. For the clamp to do its job properly, ensure the bolt is tensioned with resistance. The clamp and plate put tension on the battery box, as well as holding it secure to the tray; this keeps the battery still while you drive. 


To view the purpose-built features on a T2 Battery Tray, you can view product J20054 on our website. 

Availability:
In stock

High quality reproduction classic part! One hard wearing reproduction battery clamp; an essential for those undertaking classic vehicle maintenance jobs. If you still take your classic for an annual MOT, double check your clamps for wear. Often overlooked but if left unchecked, a rusted battery clamp could cost you your MOT result!

 

At a glance:

  • Made to the same dimensions as the original VW bracket,
  • Designed to specifically fit VW T2 Bays, built between 1967 and 1979,
  • Metal composition enhances durability and ensures lasting performance,
  • Intended for installation to the battery tray, often mounted within the offside rear corner,
  • Compatible with 12 V batteries that feature a pronounced lip at the base. 


Important product information

Secure your vehicle battery to prevent problems on future road trips. This clamp is designed to secure the vehicle battery to T2 Bays, still sporting a stock tray or fitted with an offside aftermarket version. The battery tray is designed with unique features which facilitate a secure fix for your power source.


Built with a pre-installed plate and captive nut, these features work with the clamp to secure the battery. Butt the battery up against the plate and the clamp will apply pressure to the opposite side. The clamp is upright when the central hole sits proudly at an angle.

A tab secures the battery to the tray, formed from the clamps longest edge. The tab rests on the pronounced lip at the base of your battery box. To secure the clamp, align the clamp hole with the tray hole beneath; use a compatible nut to secure them together. 

Bracket installation

The tray underside features a captive nut, welded at an angle to match the clamp. Feed your bolt through the clamp, then thread into the captive nut below. For the clamp to do its job properly, ensure the bolt is tensioned with resistance. The clamp and plate put tension on the battery box, as well as holding it secure to the tray; this keeps the battery still while you drive. 


To view the purpose-built features on a T2 Battery Tray, you can view product J20054 on our website. 

More Information
Country of Manufacture United Kingdom
EAN/UPC 5056342806812
Width (CM - Packed) 5.1
Height (CM - Packed) 1
Depth (CM - Packed) 12
OEM Part Number 211-813-191/A
  • VW T2 Bay Window
    VW T2 Bay Window (1967 - 1979) Petrol 1600cc, 1700cc, 1800cc, 2000cc LHD, RHD
  • VW T2c Brazilian Bay Window
    VW T2c Brazilian Bay Window (1997 - 2013) Water-Cooled, Air-Cooled Petrol 1400cc, 1600cc LHD, RHD
  • VW Beetle
    VW Beetle (1967 - 1979) Air-Cooled Petrol 1200cc, 1300cc, 1500cc, 1600cc LHD, RHD
  • VW Karmann Ghia
    VW Karmann Ghia (1968 - 1971) Air-Cooled Petrol 1200cc, 1300cc, 1500cc, 1600cc LHD, RHD
  • VW Type 3
    VW Type 3 (1967 - 1973) Air-Cooled Petrol 1500cc, 1600cc, 1800cc LHD, RHD
Customer Reviews
  1. Excellent battery clamp
    Overall
    100%
    Ordered this after the make do washer I had bent double. It arrived in 48 hours and fitted straight in place with no fiddling about needed. Decided to leave the shiny gold effect finish and just coated it in vaseline to keep rust at bay.

    Review by cunny44

    Posted on

  2. great item
    Overall
    100%
    Simple and easy fit, keeps the mot guy happy

    Review by tomo

    Posted on

  3. Excellent item.
    Overall
    100%
    Does exactly what it's designed for, holding a battery in it's place, excellent quality item.

    Review by VW Restorations (Halifax)

    Posted on

  4. Exactly as I needed
    Overall
    100%
    Wasn't sure that this would do the job but it went straight in, no problem. Battery secure

    Review by RB

    Posted on

  5. good quality item
    Overall
    80%
    Good quality item arrived on time, not yet fitted but, looks like it will fit fine.

    Review by yorkieman

    Posted on

Write Your Own Review
You're reviewing:Metal Battery Clamp for VW T2 Bay from 1967 – 1979
Your Rating

Seen This Product Cheaper Elsewhere?

If you have seen the same product cheaper elsewhere then please let us know.