How to fit a JK Van Cover to your VW T4, VW T5, or VW T6 Transporter
How to fit a JK Van Cover to your VW T4, VW T5, or VW T6 Transporter
Here we demo our Luxury Breathable Van Cover for VW T4, T5 & T6 Transporters. To find out more about our van covers visit visit our vehicle covers page.
How to Protect Your Van This Winter with a JK Van Cover
As the winter months approach, protecting your van becomes increasingly important. Whether you use your van for leisure or work, safeguarding it from the elements is crucial to maintaining its condition and making sure you can enjoy it for years to come.
We’ve been part of the VW community since 1989, which is why we’ve developed this JK van cover designed specifically for the VW T4, T5, and T6.
This quick guide will take you through the steps to follow when fitting your JK vehicle cover, to make sure it goes on correctly and will protect your vehicle as best it can.
Step One: Identifying the front
We’ve worked hard to make sure our vehicle covers are as user-friendly as possible.
There’s a small JK label which will help you identify the front end when you’re laying your vehicle cover out.
If you’ve got one of our luxury vehicle covers, you’ll also have access points to the cab doors and sliding door(s), which will also help you identify which end is which.
Step Two: Placing the cover over your Transporter
Now that you’ve correctly identified the front of your vehicle cover, you’ll need to pull one side over the top of your van and then secure it into place by tucking the elasticated edge underneath the bumper at the front and rear.
Now move over to the other side of the vehicle and tuck the elasticated edges under the front and rear bumper on this side, too.
Step Three: Securing the cover in place
You’ll no doubt have noticed that there’s a long strap with a buckle sewn into it, which forms part of your vehicle cover.
It might take a couple of attempts, but you’ll need to throw this under your vehicle, from one side to the other, so you can then clip it into place and then tighten it the strap up.
This will help keep your vehicle cover in place during wind or other wintry weather!
And that’s it! You’ve now fitted your JK vehicle cover to your VW, and it’s ready to withstand the elements.
About our JK Vehicle Covers – Accessibility Features:
It’s important to keep airing out the inside of your camper during the winter, to stop moisture from building up inside. That’s why our van covers are equipped with access points for doors on both sides.
Top and bottom straps allow you to tie the doors up, providing access to your sliding door while maintaining protection. Whether you're left-hand drive or right-hand drive, our cover offers convenient access points for hassle-free use.
About our JK Vehicle Covers – Weather Resistance and Breathability:
Our JK van covers are created with high-quality fabric which strikes the perfect balance between weather resistance and breathability.
Designed to be shower-resistant, it effectively repels moisture while allowing trapped heat to escape. This dual functionality protects your van against condensation build-up, which can cause problems on the inside and outside of your vehicle.
You can click here to find out more about our JK vehicle covers, which have been a popular part of our range for a long time now.
Did you know that our colleagues at Just Kampers Insurance have been offering specialist vehicle insurance since 1998?You can get a great deal on insurance for a huge range of vehicles, from daily drivers to treasured campervans, and everything in between. Just Kampers Insurance works with a huge network of insurers to find you the best deals, and they're so confident that they'll send you a £50 Just Kampers gift voucher if they can't beat your like-for-like quote!