Preservation Parts Inner Sill VW T2 Split 1950—1967

Quality Preservation Parts product. These are made for Just Kampers, on site at JK HQ, right here in Odiham, Hampshire. This replacement inner sill has been designed by us, to fit the exact dimensions of the original parts that your T2 Split left the factory with. Why not get yourself a part that will prolong the life of your Split, there’s nothing quite like repairing your classic vehicle with a perfect fitting replacement.

At a glance:

• These parts are designed using the exact measurements of the original parts,

• The parts require no fettling or alterations because the parts are made to replicate originals,

• Parts are made using top quality steel, sourced from the UK,

• Designed by JK and developed by Preservation Parts, ever-growing products range since 2012,

• Powder coated in a light grey, to keep your parts fresh in transit and storage.

Please note, these parts are manufactured to fit perfectly to the shape of your van, as it left the factory. These parts may require modification, if your classic has been subject to prior modifications over the years. Alteration may need to be done, to perfectly suit your long lived camper.

Preservation Parts Inner Sill VW T2 Split 1950—1967

This inner sill for your T2 Split, is made via the accurate specifications of original parts, as made by the factory. If you ever need to replace the inner sill on your bus, then Preservation Parts have 100% got you covered. Installing this will be as easy as pie, with no quibbles!

The Preservation Parts inner sill for T2 Split has been laser cut and formed from 1mm steel. They’re also non-handed, so they can be used on either the vans nearside or offside. This repo part will fit all VW Splits from 1950 to 1967.

Inner sills are a critical part of a vehicles supporting structure. Sills provide strength and rigidity, which is integral in case you end up in an accident. Inner sills need replacing occasionally, and that’s more than likely if your vehicle has been used more frequently than most. Inner sills can rot and rust, this is because the area where an inner sill sits, is often affected by water congregation. It’s common for classic vehicles to have damaged inner sills if they haven’t previously been replaced. Preservation parts have made one that will fit immediately and be an immediate improvement to the part that you’ve replaced. 

Parts that fit first time, every time

All of our Preservation Parts panels, metalwork and parts are made on-site at JK HQ in Odiham, using top quality, UK sourced steel. Each product has been created by hand, to match the specifications and tolerances as the original parts that your vehicle left the factory with.

Once the parts are completely assembled, they’re powder-coated in a distinctive grey, to keep them protected on their way to you and whilst they’re being stored.

Preservation Parts

Take the hassle and guesswork out of repairing and rebuilding you’re your classic VW, by using Preservation Parts products. The metalwork and panels are designed and built by experts of the trade, with decades of experience. We trial, test, and approve their products on our own vehicles. We have continued doing this since the beginning, so that you can continue buying Preservation Parts products with confidence.