Stainless Steel Single Quiet Pack VW T2 Split 1500cc 1963-1967...

On Backorder - UK Only
Save £32.82

Stainless Steel Single Quiet Pack VW T2 Split 1500cc 1963-1967 VW T2 Bay 1600cc 1967-1979

JK Part Number: J12289

Bundle Save £32.82
Save £32.82

Purchase Information

Availability: On Backorder (This product is currently out of stock but you can order now and we will send it out to you at no extra cost when it becomes available again. UK shipping addresses only.)


This high quality product features a 304 stainless steel silencer and manifold Great looks, enhanced performance and a quieter, pleasing exhaust note are what you can expect. It comes complete with its own fitting kit, but please note that modifications may be needed to the rear bumper of some splitscreen Vans.
These fit 1500cc VW T2 Splits from 1963 to 1967 and 1600cc VW T2 Bays from 1967 to 1979.
PLEASE NOTE These headers are designed for use with standard inlet manifolds. If you are using twin carb set ups, you will need to purchase pre heat block off plates J15110.

Kit comprises:
Stainless steel silencer
Stainless steel manifold
Air hose (silver colour finish)
Exhaust-fit kit

Bundle Kit Yes
Finance Available on This Product Yes
Width (CM - Packed) 0.0
Height (CM - Packed) 0.0
Depth (CM - Packed) 0.0
Manufacturer Just Kampers
Additional Carriage Charge 0.0
Special Order Lead time 0

Customer Reviews (9)

Write a review
  • Excellent

    This is a real quality exhaust. The welding on it is a work of art. It was an excellent fit and slid easily into place. If you are using this exhaust on a standard single carb inlet manifold remember to drill the pre-heater stubs so that your inlet manifold pre heating works. This should only take you a couple of minutes with a sharp drill. The bundle deal came with fitting kit, extra nuts & bolts, aluminium fresh air hose and all the gaskets you need to complete the installation.
    The exhaust note is smooth and quiet.
    This is a faily expensive piece of kit but in my opinion it's worth every penny.

    by TheDeeJay on 14/04/2013

  • Excellent product, well made

    I bought this silencer after realising that I would be needing to buy about one EMPI silencer every 18 months or so while using the bus about 9000 miles a year.
    This stainless silencer is expensive, but it is well made, and the fitting kit is one of the better quality ones.
    I had some issues with alignment but nothing too far out. Not like wrestling with the angry octopus made by EMPI.
    It does not hit the rear engine bar, but the tubes run very close to the rear tinware - about 2mm clearance in places.
    I fitted fibreglass exhaust bandage to protect me from the heat when touching the tinware, and to stop the exhaust burning through the tubes feeding air down to the heat exchangers.
    The tube bore is large - it goes over the end of the J tubes and continues at the larger diameter unlike the EMPI's with flared ends. I have had some issues with gettiing the exhaust gaskets to last on the rear ports. (after thousands of miles of use)
    It turns out that the larger tube diameter (and hole in the flange) means the metal inner part of the gasket which is meant to squash and seal does not squash when the tubes are tightened to the head.
    The hot gases then find their way through the gap and blow the ceramic spacer out the side of the gasket. Then the gasket starts burning away.
    Perhaps offering larger bore exhaust gaskets or gaskets with some other construction might help.

    by mikedjames on 03/11/2013

    JK Response

    Hi there,

    Thanks for taking the time to write this review, feedback like this is absolutely invaluable to us as it helps us to constantly expand and improve the range of parts and accessories we stock here at JK.

    We've taken your comments about the exhaust gaskets on board, and we'll be looking in to supplying larger bore exhaust gaskets with the fitting kit in future.

    Thanks again for your feedback
    The JK Team
  • Stainless exhaust

    Excellent well made product , same problems as everyone else regarding fit . It's on eventually looks and sounds great

    by Jonjack on 21/03/2015

  • Excellent well made product

    This exhaust is well made, was very easy to fit was compatible with jk heat exchangers, sounds good and has improved the drive ability of my often heavily loaded T2

    by Strandrew on 21/09/2015

  • Stainless exhaust bulk buy

    Great fast service looks great to a numpty like me but wont know what its like till april when its fitted.

    by Kortz on 05/02/2016

  • Good solid quality exhaust

    I fitted this in about 3 hrs after ordering it 24 hrs earlier - it's the first exhaust I've fitted. It's easier if you loosen the heat exchangers although I was only able to loosen one side - you also need to remove the rear piece of tinware. It's still quite a struggle to fit but goes on eventually. A couple of the manifold nuts can only be tightened with an open spanner but this seems the same as the standard manifold.

    There's a mounting point on the silencer which seemed to need a mount point one of the exhausts but I rigged up a bracket with a exhaust clamp.

    The systems looks and sounds great and I think it might have a but more oomph. Certainly seems happier going up hills.

    by Gladstone on 31/07/2016


    I can't recommend this product enough. I needed a new exhaust for my van and originally opted for the twin quiet pack by Empi. I wasn't impressed with it at all and sent it back and thank god I did. Preservation parts/JK's stainless steel pack is worth every penny and is 100 times better than the Empi one. Actually made from decent materials, the steel is thick, welds a work of art and it does everything you'd expect - improves performance, looks great, sounds even better. I've fallen back in love with my van after fitting this - thank you JKs for another great product - here's a long video of what it sounds like (use headphones so you get the basey notes).

    This is an open and honest review and in no way incentivised by JKs

    by Tim on 30/08/2016

  • Stainless steel exhaust

    Bit of a struggle to get it on , but once it's on looks good and sounds great.would definitely recommend

    by Harry.bus on 06/04/2017

  • Really impressed

    Fitted this in the hope of a little more poke from my 1641 and I’m not disappointed at all. Pulls way better uphill, looks great and sounds really nice; plenty of bass but not too much and a nice little growl when you accelerate. Lovely thing and well worth the money.

    by the DustRoom on 01/05/2019

See All Reviews

Vehicle Compatability

VW T2 Split Screen

Air-Cooled Petrol (1963 - 1967) :



VW T2 Bay Window

Air-Cooled Petrol (1967 - 1979) :



0% Finance Available - Find Out More

Interest free credit is available on all purchases of £350 or more. You can apply online or over the phone. It's quick & easy and you'll get an instant decision.

Products and packaging are subject to change or substitution without prior notice. Every effort will be made to despatch the product specified. However in the event of supply difficulties with any products listed, we reserve the right to substitute goods without prior notice.

Seen This Product Cheaper Elsewhere?

If you have seen the same product cheaper elsewhere then please let us know.

Spam Prevention

Are you a robot?