Quest Buzzard Air 300 Drive Away Awning (Low: 180–210)
-
Quest Kestral Air Drive Away Tailgate Awning VW T5 2003–2015 VW T6 2015–2024£529.00Special Order - In Stock
This great quality drive-away awning is supported by inflated air tubes, rather than traditional poles, so it’s even easier to set up and pack away.
You’ll get a stirrup pump supplied with your awning, which will allow you to inflate the beams that hold up the structure, and the pump includes a dump valve which activates when the correct pressure is reached, so you won’t run the risk of over-inflating and damaging the awning.
The connection tunnel on the side means it can be easily attached to your vehicle to give you more space while camping, and can be left behind at your camp site if you’re heading out for the day in your camper.
This low top version of the awning is designed for campervans between 180cm to 210cm high.
The height of the low top Quest Buzzard 300 makes it ideal for all sorts of VW campers, including:
• VW T2 Splits,
• VW T2 Bays,
• VW T25s,
• VW T4s,
• VW T5s, and
• VW T6s.
Measures 300cm wide by 330cm deep and 210 high.
The height of the connection area can be altered between 180cm to 210cm, depending on the height of your campervan’s roof.
The material is made of 150 Denier Polyester, and coated with Polyurethane as a waterproofing agent.
This gives the fabric a Hydrostatic Head of 4000mm, which is more than waterproof enough for all weathers in the UK.
When you need to deflate your awning and pack it away, you can just unscrew the cap on the inflatable bams to allow the air to flow back out.
How does the Quest Buzzard Awning attach to my camper?
Your drive away awning has a connection tunnel, which allows you to attach your awning to your campervan. There are a few different ways you can do this, depending on what your camper has.
• Using the kador beading:
If your vehicle has an awning channel (like a Reimo rail or similar) on it, you can use the kador strip beading on the awning’s connection tunnel to fix it to your camper. The awning has dual beading (both 4mm and 6mm) on it as standard, which can be fed into the channel on your vehicle to hold it in position.
• The ‘up and over’ method:
There are guy lines located at the end of the beading on the connection tunnel, and you can attach your awning to your campervan by taking one of the guy lines and throwing it over your vehicle, then peg this guy line in the ground as normal. You then repeat this process for the guy line at the opposite end of the tunnel, and adjust the lines so the tunnel sits just on ridge of the roof of your vehicle.
• Inflatable Air Frame structure – no poles required,
• Suppled with a pump, which includes a safety dump valve,
• Can be easily set up or packed away by just one person,
• Created with 150 Denier Oxford polyester,
• Treated with Polyurethane, with a 4000mm waterproof rating,
• Measures 300cm by 330cm by 210cm,
• Comes with a clip‑in groundsheet which can be easily removed and cleaned,
• The tunnel connection lets you easily attach it to the side of your camervan,
• Can be left at your campsite if you’re taking your camper out for the day.
Quest Awning Warranty Information:
The whole range of Quest Awnings come with a full 12-month manufacturers defect warranty, and have been built to last for years to come, using high quality materials assembled with care.
This warranty from Quest covers any manufacturers defects for one (1) year from the date of the original purchase, and the affected part will be replaced or repaired if they’re found to be defective within that time.
It does not cover any damage occurred through the awning falling or being dropped, any technical changes to the awning by the owner or another third party, improper use of the awning, or normal wear and tear (which includes fading and degradation of seams).
Please contact us if you find you need to make a warranty claim for a Quest awning which you’ve purchased from us, and we’ll help you through the process.