Loc8 Duo Sliding Door Table Storage System (RHD) VW T7 & Ford Transit V710

This great quality Duo System from Loc8 lets you make the most of the limited space in your campervan by storing a camping table in your sliding door!

You’ll get both the free-standing camping table, and the sliding door panel which the folding table fits back into when it’s not in use. The table is held into the door trim by a secure clip, which also prevents the table from rattling around while you’re driving!

Fits right-hand drive VW T7s built from 2025 onwards, and Ford Transit Custom V710’s built from 2024 onwards.

This kit will work on long wheelbase or short wheelbase vehicles, as long as they’re right-hand drive.

Please Note: Because the kit is designed for the nearside (left) sliding door, this will not work on left-hand drive vehicles.

Designed and assembled in Britain, the Loc8 Duo System can be fitted in minutes, without requiring any modifications to be made to your vehicle’s sliding door. It’s also slim enough that you won’t have any issues with opening or closing your sliding door with this fitted, whether or not the table is currently being stored in there.

All you need to do is remove the existing trim panel and replace it with the Loc8 Duo using the new black clips provided.

About the Loc8 Duo’s Folding Table:

The stand alone table which comes as part of this kit has been custom-built to fit neatly into the Loc8 sliding door trim, whilst still being large and sturdy enough to be useful either inside of your camper or outdoors.

The table has the following dimensions:

Height: 720mm,

Length: 840mm,

Width: 510mm,

Table top thickness: 10mm.

When folded down, the table measures approximately 80mm deep.

The surface has been manufactured in the UK from high quality 10mm CPL faced ply, and finished with a dark grey scivaro slate effect, so it looks great whether it’s set up while you’re camping or stored away in your camper’s sliding door.

About the Loc8 Duo’s Sliding Door Panel:

The other half of this kit is the replacement panel for your camper’s sliding door, which the table can be fitted in to. This trim panel has also been manufactured here in the UK, and is a simple replacement for your vehicle’s existing sliding door trim.

Created from black ABS, the mounting holes line up perfectly with the holes in your vehicle’s sliding door, so it’s easy to fit and is supplied with mounting clips.