Eazy 240v Plug & Play Electric Hook Up Conversion Kit - White Inlet

Part Number
J46682
OEM Part Number
EZB005
In Stock
£159.00
Need Help? Call the JK Team On 01256 86 22 88

Everything you need to allow you camper, caravan or motorhome to make use of the site or your home 240v. Outlet is included in this simple ‘plug and play’ kit!

240v access gives suitable power to a far wider range of camping equipment and even equipment used at home such as hair dryers, games consoles, or more simple things like charging laptops and phones. Just know that this will allow everything to work without any hiccups and no loss of charge to your leisure battery.


At a glance:

• Includes everything you need to make the most of 240v power in

your camper,

• Quick and easy to install, with simple instructions and

guidance included,

• Allows you to take the strain off your leisure battery, so it

won’t run flat or be damaged,

• Having a 240v system in your camper means you can power it up from your home’s power circuit,

• Supplied with everything you’ll need, right down to the

screws!


Will this fit Eazy 240 Volt kit work on my vehicle?


Designed to work with any vehicle and really simple and easy to install, the short answer is yes! Just as long as you have the right tools at home, along with some confidence and basic knowledge and skills.

There are no issues with fitting this kit to a classic vehicle such as the T2 Splitscreen or Bay Window or even to the newer campers like the VW T5, Ford Transit or Fiat Ducato.



How to install the Eazy 240 kit

The installation process is really straight forward, and can

absolutely be done yourself at home if you have the right tools, and the

knowhow to make sure it’s done accurately and safely. However, since fitting

the 240v conversion kit involves cutting a hole in the side of your vehicle,

and setting up electrical cables, we will always advise that you take your

vehicle to a trained professional to do the installation, if you’re at all

unsure of what you’re doing.

 

The first step is to identify where you want the charging point

to be located on the outside of your vehicle, and the two sets of power outlets

to be located inside the vehicle. Once you know this, you can use the template

and the correct tools to cut a hole in the side of your vehicle, and affix the

external half of the kit into this aperture. We strongly recommend that you

seal the kit in place using a bonding agent, to prevent water entering the

junction box or the inside of the vehicle.

 

With this in place and set, you can hook up the fuse box to the

inside of your vehicle, and follow the instructions to ensure that the fuse box

is properly connected to the external mounting point you fixed in place earlier.

 

From here, you can then place the two sets of power outlets

wherever you want them inside your vehicle, and connect them to the fuse box,

which will regulate the power the outlets receive. Comprehensive instructions

are included, as well as all the cables and screws you’ll need, so it’s as

simple as it can be!

Kit contents:

• The mains inlet, with a folding cover to protect the inner workings,

• A fuse box, with excellent protection against surges and other potential issues,

• Two stainless steel power outlets, each with a pair of plug sockets and on/off switches,

• Screws to fit the plug sockets, and P clips to secure the cable routings,

• A cutting diagram for placing the aperture in the side of your vehicle, The mains inlet unit comes with a 2.5 metre cable, and the two power outlets have 2 metre cables, all of which are pre-wired and ready to work as soon as they’re fitted.