Just Kampers 3 Piece Thermomat Cab Kit Renault Trafic and Vauxhall Vivaro 2004 – 2014

Part Number
J13000
In Stock
Now £49.95 £56.00
Need Help? Call the JK Team On 01256 86 22 88
Similar To This Product

Quality JK product. This three-piece set of insulating thermomats is designed to protect your vehicle from high and low temperatures. This set is made to fit the cab section on the Renault Trafics and Vauxhall Vivaros from 2004-2014. The thermomat kit is quick and easy to fit. Simply install by attaching the included suction cups and press them onto the windows. If you’re looking to protect your van from crazy temperatures and nosy onlookers, then maybe you should take a pew and read about these.


Why should I buy a thermomat kit?

These thermomats will protect the cab section of your vehicle by protecting from both fiercely hot and cold weather. The thermomats are made up of a five-layer composition which features an outward facing reflective layer. This reflective foil layer is perfect for shielding your vehicle from the hot sun. In the heat of summer, the reflective layer acts like a mirror and reflects any sunlight away from the vehicle. This is because the light would otherwise face directly into the cab area of the van and would heat it up to potentially unbearable conditions! – We all know there is nothing worse than accidentally touching the chrome seatbelt buckle with your bare elbow!



How do the thermomats insulate from the cold?

To offer optimum insulation, we have developed a 5-layer system.

The 5 layers are composed in the following layout:

• A reinforced silver foil layer (to be faced outward),

• Secondary silver reflective layer,

• Foam layer,

• Insulation layer,

• Upholstered grey fabric layer (to be faced inward).


These layers act as a thick barrier to prevents cold transferring to the inside of your van and is designed to stop your windshield freezing overnight. The mats are very easily cleaned, they can be brushed, vacuumed or wiped clean with a damp cloth.


How to install

The installation process is easy and quick. Simply take your suckers and compress the hoop end. Push this through the hole in the thermomat so that the suction cup faces the same direction as the reflective foil layer. Once you’ve installed all the suckers, simply line the mat up to the window and press firmly against the window.

Please note:

During storage, it's possible that some of the suction cups may bend and appear deformed. This is easily fixed, but will affect their ability to properly stick to glass, metal and other clean, flat surfaces.


In the unlikely event that this does happen to any of your suction cups, here's how to fix the problem:

• Boil around 500 ml of water and allow to cool a little. Then carefully pour it into a bowl,

• Gently place any affected suction cups into the water, being careful not to splash any hot water, and leave them to soak for five minutes,

• The hot water will help the suction cups to return to their usual, concave form and straighten out any bends,

• Take care to remove the suction cups from the water once it's cooled, and while the cups are still warm and soft, reform them to their correct shape.


You should only handle the suction cups if they're cool enough to safely touch.