Fiamma Crystal Rooflight Vent (40 x 40 cm)
Quality Fiamma product. This roof light vent is a greay way to get better airflow and ventillation into your campervan.
At a glance:
- Airflow is improved without the weight of an AC unit; only weighs 2.8 kg,
- Rigorously tested and ABE approved, so you can be sure you’re buying a quality product,
- Perfect for caravans, motorhomes, van conversions and pretty much any RV,
- They’re compact with no electronic components, so the take up little space on your roof,
- Designed with aerodynamic form, so noise from vibration is significantly reduced*.
*When compared to earlier versions of Fiamma vents.
Dimensions – Measurements are given as approximate figures.
- Width of vent is 40 cm,
- Depth of vent is 40 cm,
- Unit weight of 2.8 kg,
- For application to roofs with thickness between 3.0 – 5.0 cm.
The Fiamma Crystal Rooflight Vent provides a permanent airflow of approximately 80 centimetres squared.
Safety information – Read before purchasing:
Please verify with a trusted dealer that this Rooflight Vent is suitable for your RV. The vehicle must be of sound strength, to allow an opening to be made in the roof. For example, you should not fit this vent to a vehicle with substantial rust damage or corrosion, on its roof. Fiamma cannot accept responsibility for damage to your vehicle, as a result of incorrect installation.
If you’re without previous experience in fitting awning canopies, please seek fitting advice or service from a licensed professional.
Warranty information – This product comes with a full manufacturer’s warranty.
Please understand, if a returned or faulty product shows signs of incorrect use or has been damaged during fitting, we cannot guarantee the success of a warranty claim.
Not for use in very poor weather – Please ensure that you close the vent cover if you experience adverse weather.
Leaving the vent open during poor conditions, will not only allow the elements to enter your vehicle, but may also cause damage to the winch/hand wheel mechanism and adjoining components. If strong wind catches the open cover, force will be increased as it catches the entire surface, therefore any strong gust could cause damage to any pivoting components.
ABE approved.