Fiamma F65S & F80S Awning Installation Kit VW Crafter/Man (2017 onwards)

Quality Fiamma Awning Installation Kit. These brackets are made specifically by Fiamma to mount either an F65S or F80S awning, to a VW Crafter or MAN campervan conversion.

At a glance:

• Designed and manufactured by Fiamma in Italy,

• Kit includes three mounting brackets: two 20 cm and one 32 cm,

• Made for specifically the Fiamma F65S and F80S canopy awnings,

• Fits campers built from VW Crafters or MAN vehicles built from 2017 onwards,

• Designed to facilitate a bond between the awning and L3, H3 vans!

Vehicle compatibility

This adapter kit is designed specifically for fitting to the roof of your VW Crafter/Man camper built from 2017 onwards, with an L3 length and H3 height.

The awning is designed for installation above the sliding door, on your campervan. On a UK VW Crafter, this should be located on the nearside (left). If your van doesn’t quite fit the rules of a standard spec van, note that you can mount these awnings to either side of your vehicle.

These awnings and brackets will fit a MAN vehicle after 2017, without a roof rail. Before extending or packing away your Fiamma awning, please make sure the sliding door is closed!

Fitting information

Three brackets are included, to mount your Fiamma awning to your VW Crafter or MAN vehicles:

1 x 32 cm bracket.

2 x 20 cm bracket.

Safety information – Read before purchasing:

Please verify with a professional that this awning is suitable for your RV. The vehicle must be of sound strength, to support the weight of the canopy and the tension once extended.

Fiamma can’t accept responsibility for damage to your vehicle, as a result of incorrect installation.

If you’re without previous experience in fitting and installing canopy awnings, please reach out to a licenced fitter to do it for you.