Fiamma F45 Wall Adapter Awning Kit Fiat Ducato/Citroen Relay/Peugeot Boxer 2006 - 2016

Quality Fiamma Awning Installation Kit. These brackets are made specifically by Fiamma to mount F45 canopy awnings, to the high side of your vehicle. Ideal if you’ve not found the right brackets for your vehicle yet, since these are built to fit a variety of models.

Please refer to Fiamma’s vehicle profile illustration and product dimensions, before purchase. Compare these features with measurements of your van. There’s plenty of other universal mounting brackets available, which may be better suited to the shape of your vehicle.

At a glance:

• Designed and manufactured in their home of Cardano al Campo, Italy,

• Kit comprised of two 8 cm mounting brackets,

• Made specifically for use with the Fiamma F45 canopy awnings,

• Comes complete with all adaptor equipment to fit your awning to your RV,

• Versatile design, but designed to fit Ducato’s, Relay’s and Boxer’s!

Application – This adapter kit is designed to fix to the roof of your RV.

These brackets are designed to fit perfectly to the roof of the following vehicles made after 2006:

• Fiat Ducato H2,

• Citroen Relay H2,

• Peugeot Boxer H2.

Compatible with the aforementioned vehicle models, in a variety of lengths. This bracket can be used on L2 and L3 vans. Oh, we should add…If you’d like to use this bracket kit to mount an F45 to a L4 van, you still can!

To fit your F45 to an L4 Ducato, Relay or Boxer, purchase two of these bracket kits and install four mounts to your vehicle. A Longer awning will require a little extra support!

To help you choose – These brackets enable you to fit your F45 awning above the sliding door, on your conversion van. On UK produced versions of these vehicles, this should be on the nearside or curb side. If your van doesn’t quite fit the rules of standard specifications, please don’t worry, since in most cases you can mount these awnings to either side of your vehicle. Once installed, please make sure the sliding door is closed, before you open or close your canopy awning.

If you’re not certain this bracket kit is the right one for your awning and van, read through the dimensions and specifications carefully.

Fitting information

The Installation Kit comes complete with two 8 cm mounting brackets.

Dimensions – Measurements are given as approximate figures.

• Distance from edge of roof fixing to front of awning case: 19.8 cm,
• Length of plate which fixes directly to the roof: 11.8 cm,
• Distance from edge of high wall fixing to top of awning case: 15.7 cm.

Safety information – Read before purchasing:

Please verify with professional that this awning is suitable for your RV. The vehicle must be of sound strength, to support the weight of the canopy and the tension once extended. Fiamma can’t accept responsibility for damage to your vehicle, as a result of incorrect installation. If you’re without previous experience in fitting and installing canopy awnings, please reach out to a licenced fitter to do it for you.

Once installed, it’s important to periodically check that all fixings are tight and secure enough to support the weight of the canopy case.