Metal Battery Clamp for VW Beetle 1967 – 1979

Part Number
OEM Part Number
In Stock
Need Help? Call the JK Team On 01256 86 22 88
Similar To This Product

High quality reproduction classic part! One hard wearing metal battery clamp, an essential replacement part if you want your classic to pass its MOT. Secures your vehicle battery in place, preventing movement and potential disconnection of cables.


At a glance:

  • Made using the same dimensions as the original VW bracket,
  • Designed to specifically fit VW Beetles built between 1967 and 1979,
  • Made from metal for durability and lasting performance,
  • Intended installation to driver’s side floor pan, where the battery is located,
  • Compatible with batteries that have a pronounced lip around the base. 

Important product information

Secure your vehicle battery to prevent problems on future road trips. It’s common for battery clamps to rust in this area, so if yours is looking a bit worse for wear, we advise you replace it soon. This clamp follows the contours of your driver’s side rear floor pan. Locate the battery site on your floor pan by the pre-installed plate and threaded bolt. The metal plate provides a point for the battery to be ‘butt up against’.

Rest the battery against this plate, so the clamp can be installed. Once the clamp is fixed, it applies opposing pressure to the floor pan plate. The clamp is designed with a protruding tab, which secures the lip on your battery, to the vehicle floor. These forces on the battery box are what keep it still as you drive. 

Bracket installation

Secure the clamp via the threaded bolt, already fixed to your floor pan. This goes through the hole as seen in the centre of the clamp. Fix to the floor pan by using a nut. Check the nut is fixed securely, to ensure the clamp provides sufficient pressure to the battery lip.

You can view the purpose-built features of the beetle floor panel by viewing product J14627 on our website.