Fiamma Awning Kit Rain Guard Van (F45S or F35 Pro)

Part Number
OEM Part Number
In Stock
Need Help? Call the JK Team On 01256 86 22 88
Similar To This Product

Nobody likes an annoying drip! If you've investing in a Fiamma awning then you might find that you suffer with water ingress during wet weather.

The gap between the awning case and the vehicle can allow water to fall next to the door of your vehicle - partricularly during heavier showers.

The Fiamma Rain Guard - Van is designed to rectify this. Supplied as a 3m length it can be cut down to size for smaller awnings. Made specifically for use with the F45 and F35 Fiamma range - although it could potentially be indicated with other vehicle types (please carefully check your measurements if intending to use in this way).

Supplied with a cleaning wipe and pre-fixed adhesive strips for a water tight seal - the rain guard is simple to fit (although you may find that it is easier to negotiate with a second pair of hands!)

Top Tip- if you find that you have off cuts due to requiring a smaller length use this to offer up against your awning and establish the best angle for fitting.

If you have the Fiamma F45 or F35 Pro awning, this rain guard can be fitted between the van and the awning case box to stop rain penetrating into the awning.

The rain guard measures 300cm in length and 11cm wide.

The guard can also be cut down to size, if you need a smaller length.

Please note: this product may need to be modified to work with vehicles with a pop top or lifting roof.