Side Window Repair Lip VW T2 Splits 1950–1967 (Nearside and Offside)

Part Number
J20529
OEM Part Number
221-809-175/Z
In Stock
£16.50
Need Help? Call the JK Team On 01256 86 22 88
Similar To This Product

Quality Preservation Parts product. These parts are made for Just Kampers on site at JK HQ right here in Odiham, Hampshire. Designed by us and hand made by Preservation Parts, to fit the exact dimensions of the original parts that your van left the factory with.

Grab yourself a part that will prolong the life of your vehicle, Preservation Parts was developed so that you can replace your original parts with perfect VW replicas.


At a glance:

  • Powder coated in a distinctive grey, to keep your parts fresh in transit and storage,
  • The parts are made to the exact specifications of the original part,
  • Perfect parts mean that no excess pressures or warping occurs due to poor fitting parts,
  • Parts made using top quality steel, sourced from the UK,
  • Designed by JK and developed by Preservation Parts, growing range developing since 2012.


Please note, these parts are manufactured to fit perfectly to the shape of your van, as it left the factory. These parts may require modification, if your classic has been subject to prior modifications over the years. Alteration may need to be done, to perfectly suit your long lived camper. 


Side Window Repair Lip for VW T2 Splits 1950-1967 (Nearside and Offside)

Keep your van in tip top condition by replacing your side window lip with our perfect fitting repair lip.

This part is made via the exact measurements of the original parts, as made by the factory. If you ever need to replace a part or panel on your bus, then Preservation Parts have 100% got you covered. If the adjoining parts are stock factory parts, then it will replace it as easy as pie, with no quibbles!


Why should I replace my existing classic part?

The side window lip is unfortunately a part that is a little notorious for getting rusty and rotting away. This area accumulates water and small amounts are retained in gaps. This over the years can lead to rust and corrosion. This makes the metal weak, thin and can sometimes lead to holes in the panel. If you’d like to prevent this from happening, then you can purchase yourself a new and improved reproduction of the original lip!

Preservation Parts metalwork like this are made right here in the UK, in the unit which joins on to JK HQ in the Hampshire countryside.