Rear 4-Point Seatbelt VW T2 Split 1955-1967 VW T2 Bay 1967-1979

£50.50
In stock

Rear 4-Point Seatbelt VW T2 Split 1955-1967 VW T2 Bay 1967-1979

Part Number
J12397
OEM Part Number
211-857-693/C
Rating:
100 % of 100
In stock
£50.50
Please note that for safety reasons we are not able to assist with any warranties or returns for this item. Any questions or problems need to be addressed directly to the manufacturers on 01494 434455
Webbing length retractor to end bracket is 270cm. The stalk is 30cms long.
Includes bolts but you will need to make sure you have mounting plates in place or get some welded in.
Availability: In Stock

Safety belts are proven lifesavers. Don't cut corners - replace old or worn belts, or retro fit them to the rear of your van. Made in the UK by Securon, main belt length of this kit is 265cm and it comes supplied with a 30cm strap and buckle. The extra length makes it a lot easier to fit a belt around a rock 'n' roll bed and is also useful if you are using a childseat or booster cushion in the rear of your camper. It fits VW T2 Splits from 1955 to 1967 and VW T2 Bays 1967 to 1979 Please Note Due to the various conversion available it may be necessary to fit alternative mounting points. We always recommend that seat belts are fitted by a qualified technician.

Please note that for safety reasons we are not able to assist with any warranties or returns for this item. Any questions or problems need to be addressed directly to the manufacturers on 01494 434455
Webbing length retractor to end bracket is 270cm. The stalk is 30cms long.
Includes bolts but you will need to make sure you have mounting plates in place or get some welded in.
More Information
Country of Manufacture United Kingdom
EAN/UPC 5012489264007
Width (CM - Packed) 10.3
Height (CM - Packed) 7.4
Depth (CM - Packed) 32
Manufacturer Securon
OEM Part Number 211-857-693/C
  • VW T2 Bay Window
    VW T2 Bay Window (1967 - 1979) Air-Cooled Petrol 1600cc, 1700cc, 1800cc, 2000cc LHD, RHD
  • VW T2 Split Screen
    VW T2 Split Screen (1950 - 1967) Air-Cooled Petrol 1200cc, 1500cc LHD, RHD
Customer Reviews
  1. just worked fine
    Overall
    100%
    I purchased this belt to replace a lap belt on the rock and roll bed in the back of my T2 to fit a child seat booster from a child bucket seat. My van (1976 Westfalia) has the higher secure point bolt hole in the mid rail just below the window so that was fine, what I didn’t know was would the inertia bit fit under the side of the rock and roll bed, and would it work at an angle – the answer is yes to both thanks to the fitting kit supplied. The device at the side of the belt allows it to be released at any angle and orientation so it would work on the 45degree angle under the seat and it also cleared the bed fitting. Taking the bed out and back in was a more of a task than I had thought – it would be good to have another person to help you out with this as it is rather heavy. So all in all, I am getting another one for the other side as ‘Child No 2’ will need a booster seat in about 12mths.

    Review by DrSimon

    Posted on

Write Your Own Review
You're reviewing:Rear 4-Point Seatbelt VW T2 Split 1955-1967 VW T2 Bay 1967-1979
Your Rating
Customer Questions
No Questions
Please, mind that only logged in users can submit questions

Seen This Product Cheaper Elsewhere?

If you have seen the same product cheaper elsewhere then please let us know.

You Might Be Interested In