Standard Width Beam, (Adjustable) VW T2 Bay 1967-1979

In stock

Standard Width Beam, (Adjustable) VW T2 Bay 1967-1979

JK Part Number: J19546


Purchase Information

Availability: in stock (Hurry, less than 5 remaining)
Delivery: Mainland UK Only. For overseas and international shipping call +44 (0)1256 862288


Made in the UK exclusively for JK this standard width beam features CDS seamless tube with laser cut end plates. These axles come supplied with adjusters (Due to the nature of the adjusters the axle can not be set at full height, all vehicles will be slightly lower than standard) new axle bearings and a OEM steering centre pin. Finished in black powder coat These axles are designed to fit Left or Right Hand drive vans with or without servo brakes. And are supplied with spacers for the upper shock mounts.


Country of Manufacture United Kingdom
Finance Available on This Product Yes
Deposit 0.0
Width (CM - Packed) 87.0
Height (CM - Packed) 36.0
Depth (CM - Packed) 40.0
Shipping To Mainland UK Only Yes
Manufacturer Preservation Parts
Additional Carriage Charge 0.0
Special Order Lead time 0

Customer Reviews (2)

Write a review
  • Fits OK

    Well pleased with this product. No mods needed. Fitted straight in. If needed too would buy another.

    by Boyze on 24/07/2015

  • Fitted like a glove

    Great quality product that really did fit like a glove. The bolts on my shocks needed spacers both sides of the plate but that could be just my bolts I guess. Overall, very pleased.

    by Steve m Rutland on 11/12/2014

See All Reviews

Questions & Answers (8)

Ask a question
    • dave said: 27/11/2013 15:06
    • Who makes the beam and also is it posible to make one without adjusters at full hight?? Thanku
    • Answer: We have the beams made here we will be making one with out adjusters will be a couple of months as we are waiting for the next lot of parts to me made
    • Do you find this question helpful?  Yes   No
    • Mel said: 22/09/2014 11:32
    • Is the steering pivot the standard length or a modified shortened one? Thank you.
    • Answer: They are standard length not shortened. Thanks
    • Do you find this question helpful?  Yes   No
    • Diane said: 12/01/2015 08:10
    • Does this come with calipers?
    • Answer: No this is the beam, calipers are supplied separately.
    • Do you find this question helpful?  Yes   No
    • Carl said: 18/05/2015 18:09
    • Do I need to purchase torsion arm bearing and seals to accompany this ? Does it include torsion bars or do I need to remove from my old beam ?
    • Answer: you will need the seals but not the bearings
    • Do you find this question helpful?  Yes   No
    • Rob said: 11/11/2016 13:57
    • Hello

      Please can you give me the height range change from standard (Highest and lowest) and will the wheels rub when fully lowered on full lock etc, What is the limit on wheel size eg 17"dia by 7" wide .... 15" dia 5.5" wide

      Also does it have needle roller bearings. and what seals do I need please

      Thanks Rob
    • Answer: Good morning

      Set to the highest setting the beam will have the van sitting about an inch lower than standard.

      regarding wheels rubbing, tyre size etc it is not something we can advise on really as every individual van is a bit different - for example if you fitted 17's and ran the beam as low as it would go, then you will find it rubs / bottoms out, but you can modify the van to suit.

      Beam oes have roller bearings fitted, so will only need the torsion arm seals to suit

    • Do you find this question helpful?  Yes   No
    • david griffin said: 24/02/2017 15:26
    • Does the beam come with grease nipples & the torsion leaves centre fixing arrangement?
    • Answer: Yes it does everything's included except the torsion leaves.
    • Do you find this question helpful?  Yes   No
    • Hendrik Koch said: 24/03/2017 17:50
    • Is the caster angle modified? Has the swivel pin needle bearings?
    • Answer: The caster angle shouldn't be affected.
    • Do you find this question helpful?  Yes   No
    • Keith Parry said: 29/04/2017 21:29
    • When will they be in stock
      Kind regards
    • Answer: We're expecting them in the next week.
    • Do you find this question helpful?  Yes   No

Ask Your Own Question

We won't sell your details, please see our Privacy Policy

Vehicle Compatability

VW T2 Bay Window

Air-Cooled Petrol (1967 - 1979) :

1600cc, 1700cc, 1800cc, 2000cc


Products and packaging are subject to change or substitution without prior notice. Every effort will be made to despatch the product specified. However in the event of supply difficulties with any products listed, we reserve the right to substitute goods without prior notice.

Seen This Product Cheaper Elsewhere?

If you have seen the same product cheaper elsewhere then please let us know.