Stainless Steel Quiet Pack Exhaust System 1700,1800,2000cc T2 Bay VW T25 2000cc Aircooled 1900cc Watercooled 1979-1983
JK Part Number: J31194
Made from polished 304 stainless steel and sold with a lifetime waranty against faulty workmanship and rust this single quiet pack exhaust is supplied complete with tubular header and gasket kit. These fit all European spec VW T2 Bays fitted with the 1700, 1800 or 2000cc Type 4 engine from 1971 to 1979. And the 2000cc Aircooled and the 1900cc watercooled VW T25 from 1979 to 1983. (Will also require 1x J12953 and 9x J14857)
|Finance Available on This Product||Yes|
|Width (CM - Packed)||33.0|
|Height (CM - Packed)||15.0|
|Depth (CM - Packed)||78.0|
|Additional Carriage Charge||0.0|
|Special Order Lead time||0|
Customer Reviews (3)Write a review
Great ExhaustReplaced my rotten but long serving bug pack steel exhaust. Great fit with lots of adjustment. Nice but quiet sound. Discount made the deal all the sweeter. Thoroughly recommended.
by Calvedoskid on 25/12/2016
Good product,well made,looks good as well.Brought to replace the terrible Empi twin box steel system also bought from JK a few months ago ( my own fault the reviews said it was not great ). This system fitted spot on, sits dead level when installed, it has a small amount of adjustment for tailpipe angle - nice. Sounds nice, not at all loud in fact quietest Exhaust I have had on the bus particularly when cruising. Small issue with clearance on o/s bumper iron, had grind a small amount. Only complaint is for £269 you would think a new set of fitting bolts would be included along with the gaskets provided, as you can't fit this system without sourcing bolts first. Very happy, bus runs better much smoother & more low end torque.
by 66Paul on 08/08/2016
Very nice bit of kitLooks great, fitted pretty easily (a bit fiddly in places but that's more of an access issue than the fault of the system). One comment... The recommended bolts are not long enough... I had to re-use the existing bolts which was a pain in the bum! You will need at least 25mm long bolts, not the 16mm recommended on the site.
by Gary on 31/03/2016
JK ResponseThank you for your review, Im sorry to hear you had a problem with the fittings we will look at the bolts and change these as required. many thanks JKSee All Reviews
Questions & Answers (4)Ask a question
- Gregg said: 01/02/2015 11:57
- I've fitted this to my T2 and all is good, but the silencer vibrates against the header. Obviously there is a bracket on the silencer which I assume is to secure the silencer box against the header, but what with? Nothing was supplied for that purpose so what would I need?
- Answer: The answer from EMPI is to use a jubilee clip. Open the clip out fully, thread it through the hole in the bracket, wrap it around the header pipe and then close the clip back up. Other people have used a strip of metal, nut, bolt and washers to achieve the same result but it looks a lot better.
- Do you find this question helpful? Yes No
Ask Your Own Question
VW T2 Bay Window
Air-Cooled Petrol (1971 - 1979) :
1700cc, 1800cc, 2000cc
Products and packaging are subject to change or substitution without prior notice. Every effort will be made to despatch the product specified. However in the event of supply difficulties with any products listed, we reserve the right to substitute goods without prior notice.