Rock 'n' Roll Bed VW T2 Split 1955–1967 VW T2 Bay 1967–1979 VW...

In stock
£361.75

Rock 'n' Roll Bed VW T2 Split 1955–1967 VW T2 Bay 1967–1979 VW T25 1979–1992

JK Part Number: J14576

£361.75

Purchase Information

Availability: in stock

Description

Quality Just Kamper product, made in England exclusively for JK. Width adjustable, metal-framed, rock 'n' roll bed. Fits any rear engined VW van. Minimum width of 1m, maximum of 1.5m. Can be adjusted to provide either a single or a double bed which fits your interior. The powder-coated frame comes flat packed.

Please Note: You will need to source your own boards to complete the job. Once you've decided on the width, these boards are bolted onto the frame. Due to the sturdiness of the framework, you will need only 9mm plywood or MDF.

If being fitted to a T25 you will need to build a 12 cms raised platform over the engine area to match the height of the bed in the lowered position.

Country of Manufacture United Kingdom
Finance Available on This Product Yes
Deposit 0.0
Width (CM - Packed) 23.0
Height (CM - Packed) 79.0
Depth (CM - Packed) 62.0
Manufacturer Just Kampers
Additional Carriage Charge 0.0
Special Order Lead time 0

Customer Reviews (1)

Write a review
  • More difficult than the original!

    My partner installed this bed in our 1974 bay van, after taking out the original to allow us to move the interior to the far wall. Because the original had been cut to fit, it didn't have the support to be moved over, and so the hunt for a replacement started.
    We have purchased many products from Just Kampers over the years, and have largely found them to be satisfactory, but, with this bed, we felt it had been "over-engineered" making it more difficult to fold down, and move back upright then its 40 year old counterpart.
    The drop out support legs are difficult to position, especially once you have installed the boards and can no longer see what you are doing (without a crazy tilted bird-head pose going on!) and although the adjustable width was just what we required, the bed is heavier, and provides less storage underneath.
    To summarise: Only use as a last resort!

    by D. on 22/06/2014

See All Reviews

Questions & Answers (10)

Ask a question
    • Nick said: 01/02/2010 15:46
    • What are the dimensions (minimum width, distance from bend to edge of seat, distance from end to top of backrest?
    • Answer: I meant to say "from bend to top of backrest"""
    • Do you find this question helpful?  Yes   No
    • Nick said: 01/02/2010 15:50
    • What is the length when in bed position?
    • Answer: The length is approx 1900mm long when in the bed position.
    • Do you find this question helpful?  Yes   No
    • mark said: 10/02/2010 13:23
    • Is the distance betwwen the front legs adjustable? If not what is the distance? How high is the seat?
    • Answer: the distance between the feet are dependanton the width you choose to make the seat. They are not independantly adjustable.
    • Do you find this question helpful?  Yes   No
    • Damon said: 09/03/2010 19:30
    • are these seats fitted with seat belts ? If not are they available and at what cost for a full width with 3 belts fitted ? Thanks
    • Answer: These do not come fitted with seatbelts, so they would need to be bough seperately.
    • Do you find this question helpful?  Yes   No
    • Duncan said: 24/05/2010 00:02
    • Does the seat lift up in the front for storage? Thanks
    • Answer: If you construct this with a panel across the front of the lower frame you could utilize the void beneath for storage
    • Do you find this question helpful?  Yes   No
    • Iain said: 08/09/2010 19:14
    • can we have a video of this being operated in a T4
    • Answer: Unfortunately we do not have a vehicle with this fitted, I will put this forward to the web team and see what can be done
    • Do you find this question helpful?  Yes   No
    • Cesare said: 06/10/2010 00:21
    • For a T2 Bay, better this or J18090? I'm not quite sure I understand the differences. Dimensions are the same?
    • Answer: This bed can be adjusted in width to suit aftermarket interiors where as J18090 is a full width bed fixed at that width
    • Do you find this question helpful?  Yes   No
    • kevin said: 20/02/2011 12:50
    • Can you confirm that these have not been crashed tested as rear passenger 'seats' and therefore only designed to be slept on and not to be used as rear passenger seats when moving?
    • Answer: We have not had these crash tested as we have been told it is not necessary as the seatbelts are fitted to the vehicle not the seat,
    • Do you find this question helpful?  Yes   No
    • james said: 24/03/2011 18:55
    • Do the hinges on this bed have springs so you can lock the base in different positions (like your other hinges do). ie raise the base and it stays up so you can get in the cupboard. The spring mech is also used to push the bed back into a seat easily on the other hinges you sell. thanks
    • Answer: The design of these beds is different to the brackets we do, so the small spring is not necessary on this unit. There is no facility for locking the seal in any position other than seating or as a bed
    • Do you find this question helpful?  Yes   No
    • Ken said: 14/04/2011 09:06
    • Is it actually a true \rock'n'roll"bed
    • Answer: or is it a lift'n'hump'n'shove'n'hope bed? When converting the bed back into a seat
    • Do you find this question helpful?  Yes   No

Ask Your Own Question

We won't sell your details, please see our Privacy Policy




Vehicle Compatability

VW T2 Split Screen

Air-Cooled Petrol (1955 - 1967) :

1200cc, 1500cc

LHD, RHD

VW T2 Bay Window

Air-Cooled Petrol (1967 - 1979) :

1600cc, 1700cc, 1800cc, 2000cc

LHD, RHD

VW T25

Water-Cooled & Air-Cooled Petrol (1979 - 1992) :

1600cc, 1700cc, 1900cc, 2000cc, 2100cc

LHD, RHD

Water-Cooled & Air-Cooled Diesel (1979 - 1992) :

1600cc, 1700cc, 1900cc, 2000cc, 2100cc

LHD, RHD

Fitting Guide (PDF)

How to fit a rock and roll bed for Split, Type 2 & Type 25

View Fitting Guide

Products and packaging are subject to change or substitution without prior notice. Every effort will be made to despatch the product specified. However in the event of supply difficulties with any products listed, we reserve the right to substitute goods without prior notice.

Seen This Product Cheaper Elsewhere?

If you have seen the same product cheaper elsewhere then please let us know.