Heat Exchanger and Exhaust Kit VW T2 Bay 1600cc 1967-1979

On Backorder
£266.25

Heat Exchanger and Exhaust Kit VW T2 Bay 1600cc 1967-1979

JK Part Number: J11607

Bundle Save £38.55
£266.25

Purchase Information

Availability: On Backorder (This product is currently out of stock but you can order now and we will send it out to you at no extra cost when it becomes available again.)

Description

Replace your rusty old exhaust with a system that also improves the heating inside your 1600cc T2! This kit does it with a pair of heat exchangers, silencer, tailpipe, gaskets and fittings. An economical solution which also gives you the benefits of an upgraded heating system, this kit can also be fitted on earlier vans which have 1500cc or 1600cc engines.

Kit comprises:
Silencer
Tailpipe
Pair of heat exchangers
Gaskets and fittings

Bundle Kit Yes
Finance Available on This Product Yes
Deposit 0.0
Width (CM - Packed) 0.0
Height (CM - Packed) 0.0
Depth (CM - Packed) 0.0
Manufacturer Just Kampers
Additional Carriage Charge 0.0
Special Order Lead time 0

Customer Reviews (3)

Write a review
  • warming up!

    Arrived well packed and in a good size box, i would advise two to lift to avoid dropping and damaging. kit fitted to our 1974 1600 bus perfect. Road tested and the exchangers provide sufficient heating to our cab and the exhaust gives a nice throaty tone. I highly recommend this kit. Worth every penny! Thanks again jk!

    by sillyasodus on 24/10/2015

  • As always...

    Just Kampers have given me a 5 star product along with a 5 star service. Never been let down by these guys yet. HIGHLY recommend!!!

    by ScottieBarron on 16/03/2015

  • Bus-tastic

    Very pleased with price, quality and packaging.

    by M'Q on 10/02/2014

See All Reviews

Questions & Answers (10)

Ask a question
    • Nicholas said: 27/05/2010 21:35
    • Hi, Should this kit not have 4 X gasket from exhaust to cylinder head (part J10331) instead of the 2 listed, one for each cylinder? Or are there two gaskets in each J10331 part?
    • Answer: See my answer below. Thanks
    • Do you find this question helpful?  Yes   No
    • Nicholas said: 27/05/2010 21:39
    • I think I can answer my own question - the other two gaskets are part of the silencer fitting kit. Correct?
    • Answer: There are 2 gaskets in the silencer fit kit so you only need the other 2 for the exhaust ports on cylinders 1 and 3
    • Do you find this question helpful?  Yes   No
    • Neil said: 18/08/2010 02:05
    • Hi there, looking to buy this kit, i dont have anything at the moment, just the J Tubes, what else should i be looking to buy if i get this?
    • Answer: You will probably need heater cables' Heater tubes' Heater hoses. The conector pipes and grommets'Jubilee clips. Give us a call if you would like to discuss what you have and what you will require.
    • Do you find this question helpful?  Yes   No
    • diogo said: 12/12/2011 22:50
    • is there a difference between a single port and twin port, in matter of exhaust?
    • Answer: Hi there no there is no difference in the exhaust the only one this will not fit on is a 1200 cc .
    • Do you find this question helpful?  Yes   No
    • giannicola said: 06/07/2012 14:56
    • Hello dear justkampers! A little question about this kit. I have a T2 Westfalia with this motor nr. BX211100033. Does this kit fit my motor? Thanks to all & greetings from Italy!
    • Answer: Sorry but we do not list a BX engine code. If you have a 1600cc engine then this will be fine.
    • Do you find this question helpful?  Yes   No
    • dave said: 23/06/2013 14:25
    • Hi,
      roughly when is this kit going to be in stock again,
      kind regards,
      dave
    • Answer: We are just out of stock of the silencer which is due any day now. Everything else is in stock.
    • Do you find this question helpful?  Yes   No
    • Charlotte said: 11/08/2013 10:08
    • Hi, I am looking for the springs for this kit that control the hot air flaps on the heat exchangers. Also the cable and couples to attach them to the levers on the exchangers can you give me part numbers etc

      thanks
    • Answer: Please give us a call and one of the sales guys will help you out.
    • Do you find this question helpful?  Yes   No
    • Daniel said: 02/01/2014 10:18
    • Hello,
      I am looking to replace my silencer and the heat exchanger. The offered kit sounds like a good deal but do the parts need a heat resistant coat or can they be fitted as delivered?

      Thank you JK team
    • Answer: they are ok to fit as they are but they would benifit from heat resistant paint
    • Do you find this question helpful?  Yes   No
    • James said: 09/03/2014 20:05
    • Hi I brought this kit, put it together but the heat exchanger doesn't reach the top part of the exhaust (where the air duct goes) gap of about 10mm is there a part that goes between the two or should it slot in? Tried it twice and won't fit. Stumped
    • Answer: you may also need a pair of j10308 and j10547
    • Do you find this question helpful?  Yes   No
    • Shaun Barker said: 30/04/2014 21:34
    • Does this fit LHD 1970 Bay?
    • Answer: Hello, yes this will fit a LHD bay with a 1600cc engine in. The cables are however handed.
      Luke.
    • Do you find this question helpful?  Yes   No

Ask Your Own Question

We won't sell your details, please see our Privacy Policy




Vehicle Compatability

VW T2 Bay Window

Air-Cooled Petrol (1967 - 1979) :

1600cc

LHD, RHD

Air-Cooled Petrol (1967 - 1979) :

1600cc, 1700cc, 1800cc, 2000cc

LHD, RHD

Products and packaging are subject to change or substitution without prior notice. Every effort will be made to despatch the product specified. However in the event of supply difficulties with any products listed, we reserve the right to substitute goods without prior notice.

Seen This Product Cheaper Elsewhere?

If you have seen the same product cheaper elsewhere then please let us know.