Deluxe Devon Roof Cap (Buyers collect) VW T2 Bay 1967-1975

On Backorder
£560.00

Deluxe Devon Roof Cap (Buyers collect) VW T2 Bay 1967-1975

JK Part Number: J11671

Bundle Save £58.40
£560.00

Purchase Information

Availability: On Backorder (This product is currently out of stock but you can order now and we will send it out to you at no extra cost when it becomes available again.)
Collection Only: Due to the size and weight of this product we can not send it via a courier and it can only be collected from warehouse

Description

No need to remove the roof of your T2 Devon Bay with our easy-fit roof cap – it simply bonds to the existing one. Apart from some basic tools, the kit comes with everything you need, including original-style skylight (with finishing funnel); 4 uprated roof strut springs; adhesive with applicator gun; nuts and bolts and fully illustrated instructions. Please Note. If you are collecting this item you will require a large van to move this product in. We developed this solution in response to Devon owners who complained that the ageing roofs of their Devon conversions were no longer damp and weather proof.

Owing to the size of this item, shipping restrictions apply and buyers will need to arrange collection. Please check with our sales team before ordering.

Bundle Kit Yes
Finance Available on This Product Yes
Collection Only Yes
Deposit 0.0
Width (CM - Packed) 0.0
Height (CM - Packed) 0.0
Depth (CM - Packed) 0.0
Shipping To Mainland UK Only Yes
Manufacturer Just Kampers
Additional Carriage Charge 0.0
Special Order Lead time 0

Customer Reviews (3)

Write a review
  • Devon DELUX Roof cap

    Thought cap as cap exellent BUT could not understand why this cap does not have an upstand for the roof light instead of funnel ,so that when or if you have to cut hole for roof light you are not left with a potential leak situation between the funnel and the cap where one goes through the other. whilst sealeant is very good these days i feel it would be easier and better to have an upstand built into cap as one.That said i have fitted mine today, with another added difficulty of larger existing roof opening than 350 mm sq ie 395mm sq. and beautiful roof lining already in!!That said i used the 335mm square funnel supplied and made an in fil upstand under roof cap to take up slack, my existing skylight cap was the same size IE 465 mmsq.

    BEFORE fitting new cap /roof light i did insulate roof with super light solar insuation which helps keep van cool in summer and warm in winter, yipee!! ITS only about 10 mm thick too!! so no prob fitting under cap !!fixed down with foil duct tape / great stuff.

    CAP and skylight on 6HRS later .
    New springs still to fit, ive heard these are not as easy to fit as jk instructions suggest??, any tips ?? Also it would be good to get a new funnel/upstand/ skylight SEAL to fit so as to hopefully make roof now ready for a wet summer ha ha!!With some minor design mods this would be a top leakproof product and possibly more user friendly?Not a moan just some observations whilst installing with skylight!!

    by john on 12/02/2011

  • Devon roof cap

    Excellent product just had new bellows fitted by concept pop tops and asked if they could also fit the new cap , no problem just got back from a rather wet weekend and no leaks at last a cost effective solution. Buy one and save your campers interior.

    by Miles on 03/05/2010

  • Devon Roof Cap

    Excellant product, and relatively easy to fit. I fiited this August last year, just before a downpour...and saved the new upholstery from a soaking !!! As always the work is in the preperation, and I would recommend fitting new bellows before putting the cap on....even if it means saving up a bit longer.

    by Valerie Burdett on 22/03/2010

See All Reviews

Questions & Answers (4)

Ask a question
    • john said: 02/02/2011 14:28
    • Do you supply full fitting instructions with this? im bit concerned on fitting new springs and that skylight opening is same size as original as never fitted b4? cheers
    • Answer: Yes, this is supplied with instructions, but it is all very simple and self explanitory. If you have any further concerns youu can discuss it when you collect the item
    • Do you find this question helpful?  Yes   No
    • john said: 16/02/2011 22:50
    • Hi have fitted my new roof cap, and sky light funnel. I did purchase a dormobile seal to fit to top funnel/upstand from you as this was all i could find but have found new skylight cap difficult to fit with this on. do you have an alternative seal that is very flexible to fit round reasonably sharp corners as am worried about water coming in when driving in bad rain?? Also any tips on getting new springs in that dont involve superman please , im sure their must be a simple way??Im sure will look great once finished.My original skylight opening was bigger than 340sq ie 395sq so had to fit internal frame to suit funnel under new roof before cutting hole for funnel. may be on your next design you could add a moulded upstand instead of having to cut a hole which would make more user friendly and 100% leakproof as per just cap!!
    • Answer: The seal should be pliable enough with some gentle persuasion. The spings can be compressed using a ratchet tie-down if you and a friend cant manage it. As for the skylight, we designed it for the original sized unit, if you have a larger appeture this may require some modifications back to the original size, or for you to use the bigger Fiamma skylight ( J13404 )
    • Do you find this question helpful?  Yes   No
    • MartinL said: 29/04/2016 13:06
    • Will this item fit inside a bay?
    • Answer: good afternoon

      Unfortunately not, they just about fit into a SWB T4

      The angles on a T2 mean you can't physically get the cap inside it

      kind regards
    • Do you find this question helpful?  Yes   No
    • Andy said: 02/12/2016 19:33
    • Hi, I am looking to replace my tired Devon roof using your replacement using the deluxe kit J11671. Could you please send me the dimensions as i would like to make sure that it fits before hiring a van and travelling from Plymouth to collect.

      Many thanks
    • Answer: The size of the cap is 135x241x10cm
    • Do you find this question helpful?  Yes   No

Ask Your Own Question

We won't sell your details, please see our Privacy Policy




Vehicle Compatability

VW T2 Bay Window

Air-Cooled Petrol (1967 - 1975) :

1600cc, 1700cc, 1800cc, 2000cc

RHD

Air-Cooled Petrol (1967 - 1975) :

1600cc, 1700cc, 1800cc, 2000cc

LHD, RHD

Products and packaging are subject to change or substitution without prior notice. Every effort will be made to despatch the product specified. However in the event of supply difficulties with any products listed, we reserve the right to substitute goods without prior notice.

Seen This Product Cheaper Elsewhere?

If you have seen the same product cheaper elsewhere then please let us know.